This manual contains the information you need to install and use the IBM 16/4 Token-Ring CardBus Adapter.
This manual is intended for use by network administrators and other end users who install token-ring adapter hardware and software.
Introduction to the IBM 16/4 Token-Ring CardBus Adapter describes the features of the IBM 16/4 Token-Ring CardBus Adapter.
Inserting and removing the IBM 16/4 Token-Ring CardBus Adapter describes the procedure for installing the CardBus adapter hardware.
Software installation describes the procedure for software installation for a number of network operating environments.
Point enablers and Card and Socket Services describes point enablers and Card and Socket Services software.
Problem solving describes troubleshooting procedures and fixes that might be needed for your environment.
Appendix A, CD-ROM content and software packages describes the files that are on the IBM 16/4 Token-Ring CardBus Adapter CD-ROM.
Appendix B, NDIS 2 device driver parameters lists the NDIS 2 parameters, describes their usage, and lists their values.
Appendix C, NDIS 2 device driver messages lists the NDIS 2 system messages, explains the meaning, and lists user actions.
Appendix D, Notices lists the legal notices required for the IBM 16/4 Token-Ring CardBus Adapter.
Refer to these publications for additional information:
IBM adapter books and other documentation are available on the IBM Networking Web site:
http://www.ibm.com/networking